Для того, чтобы не потерять настроек ftp-сервера ProFTPD при переезде на новый сервер без ISP-manager'а, сохраню настройки основного конфигурационного файла proftpd.conf на всякий случай (вдруг пригодятся, если после переезда что-то пойдёт не так, а старый сервер будет уже удалён вместе со всем его содержимым). Сделать это просто и быстро, с минимальными затратами времени и сил (в отличие от возможных затрат времени и сил в поисках решений при возникновении каких-либо сбоев в работе нового сервера с ftp-доступом пользователей к их файлам).
О конфигурации системы
Операционная система и её версия:
root@oldserver:~# cat /etc/issue
Debian GNU/Linux 8 \n \lВерсия установленного ISP-менеджера: ISPmanager Lite 5.193.0 (официальная)
Версия ProFTPD:
root@oldserver:~# proftpd -v
ProFTPD Version 1.3.5Содержимое конфига proftpd.conf
Ну и собственно файл конфигурации, который лежит по стандартному пути /etc/proftpd/proftpd.conf:
#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes, reload proftpd after modifications, if
# it runs in daemon mode. It is not required in inetd/xinetd mode.
#
# Includes DSO modules
Include /etc/proftpd/modules.conf
# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 on
# If set on you can experience a longer connection delay in many cases.
IdentLookups off
ServerName "Debian"
ServerType standalone
DeferWelcome off
MultilineRFC2228 on
DefaultServer on
ShowSymlinks on
TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200
DisplayLogin welcome.msg
DisplayChdir .message true
ListOptions "-l"
DenyFilter \*.*/
# Use this to jail all users in their homes
# DefaultRoot ~
# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
# RequireValidShell off
# Port 21 is the standard FTP port.
Port 21
# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534
# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress 1.2.3.4
# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30
# Set the user and group that the server normally runs at.
User proftpd
Group nogroup
# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on
# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd off
# This is required to use both PAM-based authentication and local passwords
# AuthOrder mod_auth_pam.c* mod_auth_unix.c
# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile off
TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log
# Logging onto /var/log/lastlog is enabled but set to off by default
#UseLastlog on
# In order to keep log file dates consistent after chroot, use timezone info
# from /etc/localtime. If this is not set, and proftpd is configured to
# chroot (e.g. DefaultRoot or <Anonymous>), it will use the non-daylight
# savings timezone regardless of whether DST is in effect.
#SetEnv TZ :/etc/localtime
<IfModule mod_quotatab.c>
QuotaEngine off
</IfModule>
<IfModule mod_ratio.c>
Ratios off
</IfModule>
# Delay engine reduces impact of the so-called Timing Attack described in
# http://www.securityfocus.com/bid/11430/discuss
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>
<IfModule mod_ctrls.c>
ControlsEngine off
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock
</IfModule>
<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>
#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf
#
# This is used for FTPS connections
#
Include /etc/proftpd/tls.conf
#
# Useful to keep VirtualHost/VirtualRoot directives separated
#
#Include /etc/proftpd/virtuals.conf
# A basic anonymous configuration, no upload directories.
# <Anonymous ~ftp>
# User ftp
# Group nogroup
# # We want clients to be able to login with "anonymous" as well as "ftp"
# UserAlias anonymous ftp
# # Cosmetic changes, all files belongs to ftp user
# DirFakeUser on ftp
# DirFakeGroup on ftp
#
# RequireValidShell off
#
# # Limit the maximum number of anonymous logins
# MaxClients 10
#
# # We want 'welcome.msg' displayed at login, and '.message' displayed
# # in each newly chdired directory.
# DisplayLogin welcome.msg
# DisplayChdir .message
#
# # Limit WRITE everywhere in the anonymous chroot
# <Directory *>
# <Limit WRITE>
# DenyAll
# </Limit>
# </Directory>
#
# # Uncomment this if you're brave.
# # <Directory incoming>
# # # Umask 022 is a good standard umask to prevent new files and dirs
# # # (second parm) from being group and world writable.
# # Umask 022 022
# # <Limit READ WRITE>
# # DenyAll
# # </Limit>
# # <Limit STOR>
# # AllowAll
# # </Limit>
# # </Directory>
#
# </Anonymous>
# Include other custom configuration files
Include /etc/proftpd/conf.d/
AuthUserFile /etc/proftpd/proftpd.passwd
AuthOrder mod_auth_file.c
RequireValidShell off
DefaultRoot ~
Заключительные действия по фиксированию состояния работающей системы настроек ftp-сервера ProFTPD
Ну и напоследок, создам архив со всеми файлами директории /etc/proftpd. Благо их немного, включая пустую директорию conf.d:
root@oldserver:/etc/proftpd# pwd
/etc/proftpd
root@oldserver:/etc/proftpd# ls -l
total 1336
-rw-r--r-- 1 root root 1310700 May 19 2015 blacklist.dat
drwxr-xr-x 2 root root 4096 May 19 2015 conf.d
-rw-r--r-- 1 root root 9420 May 19 2015 dhparams.pem
-rw-r--r-- 1 root root 701 Feb 4 2017 ldap.conf
-rw-r--r-- 1 root root 2682 Feb 4 2017 modules.conf
-rw-r--r-- 1 root root 5458 Feb 4 2017 proftpd.conf
-rw-r--r-- 1 root root 5356 Feb 4 2017 proftpd.conf.orig
-rw-r----- 1 proftpd nogroup 174 Feb 25 2018 proftpd.passwd
-rw-r--r-- 1 root root 862 Feb 4 2017 sql.conf
-rw-r--r-- 1 root root 2170 Feb 4 2017 tls.conf
-rw-r--r-- 1 root root 832 Feb 4 2017 virtuals.confТеперь кажется всё. =)
Заберите ссылку на статью к себе, чтобы потом легко её найти!
Раз уж досюда дочитали, то может может есть желание рассказать об этом месте своим друзьям, знакомым и просто мимо проходящим?
Не надо себя сдерживать! ;)
